Distributor Login
Print Email

PART # 1166

 

Inventory

Request

Description

    10-1/4"(260 mm); .401 Turn Type Shank;Brake Pin & Bushing Driver Set Consists of 1 ea. #1114 Pin Driver & 1 ea. 1115 Sleeve Driver.
 
$95.95
1166
Enlarge View
Product Type
Chisels
Body Size
1/2 in (12.7 mm)
Shank Size
0.401 in (10.2 mm)
Shank Length
1-3/4 in (44.5 mm)
Collar Size
3/4 in (19.1 mm)
Product Weight
1.240 lbs (0.6 kg)
Overall Length
10-1/4 in (260.35 mm)
eye_protection
TAKE THE TIME
TO WORK SAFELY!
SAFETY WARNINGS ARE AVAILABLE BY CLICKING ON THE SAFETY TAB ON THIS PAGE.
WARNING_HEARING
 

Safety_thumbnailSafety_Sheet_thumnail

AJAX CHISELS AND PUNCHES SHOULD NEVER BE STRUCK AGAINST SURFACES THAT ARE HARDER THAN THE TOOLS THEMSELVES;  I.E., “BEARINGS” AND “BEARING RACES” HAVE A MUCH HIGHER HARDNESS THAN THE OPTIMUM HARDNESS OF THE WORKING END OF ALL CHISELS AND PUNCHES.  THERE ARE SPECIFIC AND SAFER PROCEDURES FOR THE REMOVAL OF THESE TYPES OF ITEMS.  FOLLOW CERTIFIED MECHANIC’S RESOURCES FOR CORRECT APPLICATION OF TOOLS OR CALL AJAX TOOLS FOR ASSISTANCE.

 

 
Automotive:

1. Auto Body Repair Shops use these chisels for general body repair or replacement.

2. Auto Service Centers use these chisels on mufflers, shocks, and front end repairs.

Industrial:

1. Motor coach and Recreational vehicles use these chisels for sheet metal cutting of windows and doors.

2. Plant Maintenance use these chisels in general maintenance and repair.

3. Foundries use these chisels for chipping small castings.

Construction:

1. Maintenance departments use these tools for general machinery repair.

 

Wear Safety Goggles and ALL other Appropriate Gear.

Ajax Zip Gun Chisels are available in over 100 point styles.  Choose the correct point style for your particular application.

Inspect and Maintain the chisel retainer that connects to the pneumatic hammer to retain the chisel during use.

KEEP CHISELS SHARP!

The Ajax Pneumatic Brake Pin & Bushing Driver Kit is designed to remove brake anchor pins and bushing.  These tools can be use on "Q" type brake systems with 1-1/4" anchor pins that fit Meritor, Rockwell, and Dana-Spicer brake systems, with weights ranging from 16,000 to 30,000 pounds.

 

These tools are available for use with either .401 or .498 Shank air hammers, and can reduce removal and installation time by up to 70%.  In addition, these tools will eliminate the need to heat (torch) seized pins and bushings during removal process.  Simply use the pin driver to drive out the pin and the bushing.  Then use the bushing driver to install the new bushing sleeve.

close (X)