Distributor Login
Print Email

PART # 603

 

Inventory

Request

Description

    6 in (152.4 mm) Overall Length; 11/16 in (17.5 mm) Standard Diameter; 2-3/4 in (69.9 mm) Length of Taper; 5/16 in (7.9 mm) Point Size; Single End Drift Pin
 
$4.60
602
Enlarge View
Standard Diameter
Single End Drift Pins
Product Type
Pins
Overall Length
6 in (152.4 mm)
Point Size
5/16 in (7.9 mm)
Product Weight
0.480 lbs (0.2 kg)
Taper Length
2-3/4 in (69.9 mm)
eye_protection
TAKE THE TIME
TO WORK SAFELY!
SAFETY WARNINGS ARE AVAILABLE BY CLICKING ON THE SAFETY TAB ON THIS PAGE.
WARNING_HEARING
 

Safety_thumbnailSafety_Sheet_thumnail

Construction:

1. Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.

Wear Safety Goggles and ALL other Appropriate Gear.

Note:  Barrel drift pins are 1/16" larger than the bolt.

never stike a structural wrench with a hammer.

Never use an extension on a wrench handle.

 

 

Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.
close (X)