Distributor Login
Print Email

PART # 625

 

Inventory

Request

Description

    8 in (203.2 mm) Overall Length; 15/16 in (23.8 mm) Standard Diameter; 3-3/4 in (95.3 mm) Length of Taper; 3/8 in (9.5 mm) Point Size; Single End Drift Pin
 
$7.75
625
Enlarge View
Standard Diameter
Single End Drift Pins
Product Type
Pins
Overall Length
8 in (203.2 mm)
Point Size
3/8 in (9.5 mm)
Product Weight
1.240 lbs (0.6 kg)
Taper Length
3-3/4 in (95.3 mm)
eye_protection
TAKE THE TIME
TO WORK SAFELY!
SAFETY WARNINGS ARE AVAILABLE BY CLICKING ON THE SAFETY TAB ON THIS PAGE.
WARNING_HEARING
 

Safety_thumbnailSafety_Sheet_thumnail

Construction:

1. Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.

Wear Safety Goggles and ALL other Appropriate Gear.

Note:  Barrel drift pins are 1/16" larger than the bolt.

never stike a structural wrench with a hammer.

Never use an extension on a wrench handle.

 

 

Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.
close (X)