7/16" Diameter, Single End Drift Pin, 3/16" Point Size, 6" Long 601 fullscreenView Full 7/16" Diameter, Single End Drift Pin, 3/16" Point Size, 6" Long 601

7/16" Diameter, Single End Drift Pin, 3/16" Point Size, 6" Long

$9.60
Item #: 601
UPC:
Availability: In Stock

Description:

6 in (152.4 mm) Overall Length; 7/16 in (11.1 mm) Standard Diameter; 2-1/2 in (63.5 mm) Length of Taper; 3/16 in (4.8 mm) Point Size; Single End Drift Pin
Total: $9.60

Specifications

Product Type: Pins
Overall Length: 6 in - (152.4 mm)
Product Weight: 0.200 lbs - (0.1 kg)
Point Size: 3/16 in - (4.8 mm)
Standard Diameter: Single End Drift Pins
Taper Length: 2-1/2 in - (63.5 mm)
TAKE THE TIME TO WORK SAFELY! SAFETY WARNINGS ARE AVAILABLE BY CLICKING ON THE SAFETY TAB BELOW.
Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.
Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.|

Safety Card Safety Sheet

|
Construction:

1. Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.

|

Wear Safety Goggles and ALL other Appropriate Gear.

Note:  Barrel drift pins are 1/16" larger than the bolt.

never stike a structural wrench with a hammer.

Never use an extension on a wrench handle.

||

Our Company

 

Distributors

Ajax Tool Works Design

10801 Franklin Ave.
Franklin Park, IL 60131
Toll-free: 800-323-9129