Description
6 in (152.4 mm) Overall Length; 7/16 in (11.1 mm) Standard Diameter; 2 in (50.8 mm) Length of Taper; 3/16 in (4.8 mm) Point Size; Barrel Drift Pin
|
Overall Length
|
Point Size
|
Taper Length
|
Product Weight
|
|
Standard Diameter
|
Product Type
|
TAKE THE TIME
TO WORK SAFELY!
SAFETY WARNINGS ARE AVAILABLE BY CLICKING ON THE SAFETY TAB ON THIS PAGE.
Construction:
1. Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.
Wear Safety Goggles and ALL other Appropriate Gear.
Note: Barrel drift pins are 1/16" larger than the bolt.
never stike a structural wrench with a hammer.
Never use an extension on a wrench handle.
Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate. Note: Drift Pins are 1/16" larger than the bolt or hole. For example, a 13/16 diameter pin should be used for 3/4" bolt or hole. Also other styles and sizes are available upon request.
Skip to Main Content